Belt cleaning systems are designed for efficient cleaning of belting carrying fine and powdery materials and dry or slightly moist bulk materials.

The first-pass cleaner is also called the first-pass cleaner. The H-shaped cleaner is installed at the head roller. The scraper material is made of super wear-resistant polyurethane. The pressure of the scraper on the conveyor belt is changed by adjusting the spring to achieve the effect of thoroughly cleaning the material.

The conveyor cleaner is a device used to clean the conveyor. During the conveyor process of the belt conveyor, if residual attached materials enter the roller or roller bearing seat, the bearing wear will be accelerated, and the material sticking to the surface of the roller or roller will cause Tear and nap the conveyor belt cover, accelerating the wear and damage of the conveyor belt.

The first cleaner adopts a straight-shaped scraper, which ensures stable and low contact force between the scraper and the belt, and has a long service life. The oblong buffer hole in the middle makes the scraper have good buffering and follow-up performance and high impact resistance. The special dust jacket seals the torsion spring group to prevent the self-adjusting function from being unable to fully exert its function due to material jamming or dust accumulation.

Product features

1. The scraper is of standardized design, good interchangeability, lightweight, and easy to install, maintain and replace.
2. Effectively eliminate material carrying back and reduce material loss.
3. Decrease the downtime and maintenance costs. Long service life. Service life is 3-4 times more than a metal rubber scraper.
4. A heavy-duty belt scraper is designed for cleaning edges from high belt speeds. The blade design maintains cleaning performance through all stages of blade life.  An aluminum extrusion in the belt cleaner blade base holds the cleaner snugly to the backbone. Max length for the heavy-duty belt scraper we can produce is 2000mm for you.